Metallic Epoxy Floors in Evansville
Metallic epoxy turns a gray slab into a flowing, marbled surface. It is the most decorative system we connect homeowners with, and the one where installer skill shows most.
Get a Free QuoteThe problem: a garage or basement that should look finished but doesn't
Some spaces are more than parking. A car-collector garage, a finished basement bar, a home gym or a small showroom often gets nice walls, lighting and cabinets, then sits on plain concrete. Flake floors are tough and practical, but some homeowners want something closer to stone or polished resin. That is where metallic epoxy comes in.
The other common problem is a floor that is already coated but looks dated: a faded gray paint job, a peeling roll-on kit, or a plain solid color that shows every scuff. Those floors can usually be ground back to sound concrete and recoated, which gives a good chance to move to a decorative finish. Light conditions matter here as well. Garages with the door open on summer afternoons get direct sun, and Evansville averages about 41 days a year at or above 90°F, so a UV-resistant clear topcoat is worth discussing for any metallic floor that sees daylight.
The solution: what metallic epoxy is
Metallic epoxy uses a clear epoxy loaded with metallic or pearlescent pigment. While it is still wet, the installer moves it with rollers, brushes, sprays or blowers to create movement, veining and depth. No two floors look the same.
- A deep, high-gloss, seamless look that suits showrooms, basements and finished garages
- Endless color combinations, from silver and charcoal to copper, bronze and blue
- Easy to sweep and mop, with no grout lines
- Can be finished with a clear topcoat for added wear and UV resistance
There are real trade-offs. A smooth metallic floor shows dust, scratches and footprints more than a busy flake blend, and it can be slick when wet unless an anti-slip additive goes into the topcoat. In a daily-driver garage that sees salty winter slush, a flake floor is usually the more forgiving choice. Our comparison of flake vs metallic vs solid color lays this out, and are epoxy garage floors slippery? covers traction.
How a metallic floor is installed
Metallic floors start with the same groundwork as any coating. The artistic part comes later. Our process page explains the core steps.
Design consult
You look at color samples and photos of finishes, and talk through how much movement and contrast you want.
Grind and repair
The slab is diamond ground and cracks are filled and sanded flush. Any flaw left now can show through a glossy finish. See concrete prep.
Primer and base color
A primer and a solid tinted base coat create an even background for the metallic layer.
Metallic layer
The metallic epoxy is poured and worked by hand to build the pattern. Timing and technique decide the look.
Clear topcoat
A clear topcoat adds wear resistance. Anti-slip additive can be included. Ventilate and follow product cure directions before use.
Typical metallic epoxy cost
Typical installed ranges, 2025–2026 (estimates only): metallic epoxy runs about $10–$16 per sq ft, roughly $2,500–$4,000 for a 1-car garage, $5,000–$8,000 for a 2-car and $7,500–$12,000 for a 3-car. Basement floors around 1,000 sq ft typically run $5,000–$8,000 in general epoxy pricing, and metallic finishes tend toward the higher end of decorative work.
It costs more because it uses more material and labor and takes more skill. Compare all systems on our garage floor epoxy cost guide, then get a free quote for your space.
Tip: ask any installer for photos of metallic floors they have personally done and, if possible, the address of one you can see in person. Metallic finishes vary more from crew to crew than any other system.
Metallic Epoxy FAQ
Is a metallic epoxy floor good for a garage?
It can be, especially in a show garage or a lightly used space. In a daily-driver garage, the smooth glossy surface will show dust, salt residue and tire marks more than a flake floor, and it needs an anti-slip additive for wet traction. Many homeowners choose metallic for basements or showrooms and flake for the main garage.
How much does metallic epoxy cost per square foot?
Using typical 2025–2026 installed ranges, metallic epoxy costs about $10 to $16 per square foot. That works out to roughly $5,000 to $8,000 for a 2-car garage of about 500 square feet. These are estimates only. Slab repairs, color complexity and topcoat choice change the final price, which comes from an on-site quote.
Can metallic epoxy go in a basement?
Yes, metallic finishes are popular in finished basements, but basement slabs must be tested for moisture first. Moisture pushing up through the concrete can cause bubbles or peeling under any coating. If testing shows high moisture, a moisture-mitigating primer may be needed, which typically adds about $1 per square foot.
Does metallic epoxy scratch easily?
Any high-gloss floor shows fine scratches more readily than a textured flake floor. A hard clear topcoat helps a lot, and felt pads under furniture, walk-off mats and regular sweeping of grit keep it looking good. Dragging steel equipment or jack stands across it will mark it, so plan the space with that in mind.
Ready for a garage floor that cleans up in minutes?
Free, no-pressure quotes across Evansville, Newburgh, Henderson and the Tri-State.